How to Handle Delivery and Storage of Select Fill in Dallas-Fort Worth Projects

Introduction

Proper delivery and storage of Select Fill can make or break a construction project in Dallas-Fort Worth (DFW). Even if you source high-quality Select Fill from a trusted Borrow Pit, improper handling can lead to wasted material, poor compaction, and increased costs.

This guide will cover:

• How to coordinate efficient deliveries from Borrow Pit suppliers.
• Best practices for unloading and storing Select Fill.
• How to prevent contamination, moisture issues, and material loss.

1. Coordinating Efficient Select Fill Deliveries in DFW

A. Choosing the Right Delivery Schedule

• Order Select Fill based on your construction timeline to avoid delays or excessive stockpiling.
• Consider weather conditions—heavy rain can cause moisture issues in stored material.
• Work with local Borrow Pits to schedule deliveries during non-peak hours for faster service.

B. Understanding Truckload Capacities

• Select Fill is typically delivered in dump trucks, belly dumps, or semi-end dumps.
• Common load capacities for Select Fill in DFW:
  • Single-axle dump truck: 5–7 cubic yards
  • Tandem-axle dump truck: 12–16 cubic yards
  • Semi-end dump trailer: 20–25 cubic yards
• Ordering full truckloads minimizes costs per cubic yard.

C. Site Preparation for Delivery

• Ensure clear access roads for delivery trucks to prevent delays.
• Mark the dump site to direct drivers and avoid material being unloaded in the wrong location.
• Use grading equipment to spread material evenly as it is delivered.

2. Best Practices for Unloading Select Fill

A. Checking Material Quality Before Unloading

• Inspect moisture levels, particle size, and contamination before accepting a load.
• Reject loads with excessive organic material, debris, or oversized rocks that could impact compaction.
• Use a field moisture test—Select Fill should form a firm ball when squeezed but break apart under pressure.

B. Unloading Methods for Even Distribution

• Dump-and-spread technique: Trucks dump material as they drive forward to create an even layer.
• Layered unloading: Unloading Select Fill in thin layers (6-12 inches) improves compaction.
• Avoid stockpiling too high—piles over 8 feet can lead to excessive moisture retention.

3. Proper Storage Techniques for Select Fill

A. Choosing the Right Storage Location

• Store Select Fill on level, well-drained ground to prevent water pooling.
• Keep material close to the construction site but away from traffic areas to minimize disturbance.
• If possible, store Select Fill on a tarp or compacted base to prevent contamination.

B. Preventing Moisture Issues

• Excess moisture can make Select Fill difficult to compact, leading to structural problems.
• Cover stored material with tarps or temporary shelters if rain is expected.
• Avoid storing material in low-lying areas that collect water.

C. Preventing Contamination & Material Loss

• Keep Select Fill separate from other materials to maintain its integrity.
• Use barriers or berms to prevent wind or rain erosion.
• Regularly inspect stored material for debris, organic matter, or unwanted material mixing.

4. How to Maintain Quality Control During Storage

A. Regular Testing of Stockpiled Select Fill

• Moisture Content Testing: Ensure material is not too wet or too dry for proper compaction.
• Particle Size Analysis: Periodic sieve testing confirms material consistency.
• Compaction Testing: Randomly check compacted material to ensure it meets density requirements.

B. Using Select Fill in the Right Order

• Follow the “first in, first out” method—use older material first to avoid excessive moisture absorption.
• Rework material before use—turn and aerate stored fill to maintain uniform consistency.

Conclusion

Efficient delivery and storage of Select Fill is essential for successful construction projects in Dallas-Fort Worth. By working with trusted Borrow Pit suppliers, following proper unloading techniques, and storing material correctly, contractors can ensure high-quality, cost-effective Select Fill usage.

For DFW’s best Select Fill and Borrow Pit options, visit Borrow-Pit.com and connect with reliable local suppliers today!